Charging instructions
Attention!
Important information about your rechargeable 4.8V NiMH Battery pack.
(See drawing)
1. The charging time for these 4.8V NiMH Battery pack is max. 4 hours, an overload damage it
and shortens the life.
2. Let the charger and the battery during charging never unattended.
3. If the speed / performance of your RC model decreases or even stops, immediately
stop operation and charge the battery (Note the charge time: point 1) again.
4. To maintain the performance of the battery, please charge the battery only when it is empty.
Keys and functions of the transmitter
Control functions (see drawing).
Pictures from top of the page to bottom.
Drawings 1. Row:
Left stick forward – Move forwards.
Left stick backwards – Move backwards.
Drawings 2. Row:
Press the right stick to leftside - left turn.
Press the right stick to rightside - right turn.
Drawings 3. Row:
Press right function key – shovel lift up.
Press left function key – shovel bring down.
Troubleshooting
1. Check the battery connections on the remote control or replace the depleted battery with a
freshness.
2. Check the battery connector in the battery compartment of the model or charge the new battery.
3. Check whether any other wireless device with the same technical frequency in it’s nearby.
