Carson Phoenix, Instruction Manual

1. External DC/AC 12V power control method

a. DC/AC 12V trigger signal goes from off to on, the screen turn on and 

runs upward;

b. DC/AC 12V trigger signal from on to off, the screen turn off and 

downward operation;

c. Input voltage range: DC/AC 5V-12V.

2. Dry contact control:

Connect the port to the 6P network cable.

Function control:

a. A. Connect line 3+ line 6, pulse signal triggers the screen continues to 

go up.

b. Connect line 4+ line 6, pulse signal triggers the screen stops running.

c. Connect line 5+ line 6, pulse signal triggers the screen continues to go 

down.

Screen Control Methods (cont.)

3. Central control:

Connect the port to the 6P network cable

RS485 Port Settings

1. Baud rate: 2400

2. Data length: 8

3. Parity check: N

4. Starting bit: 1

5. Stop bit: 1

Control code

1. “ Up” command: 0xFF 0xAA 0xEE 0xEE 0xDD

2. “ Stop” command: 0xFF 0xAA 0xEE 0xEE 0xCC

3. ”Down” command: 0xFF 0xAA 0xEE 0xEE 0xEE

Function control

1. Uplink command: The screen continues to go up;

2. Stop command: The screen stops running.

3. Downlink command: The screen continues to go down.