CARSON Reflex Stick Ultimate Touch 500501002
110
GB
Delete the model file in the SD card.
How to operate:
1. Enter model function and press file deleted
2. Select one file you need to delete
3. Press OK to complete deleting
All the model settings must be reset to default
state of airplane or glider, then enter “modify”.
The default structure of airplane or glider is 4 chan-
nels (throttle, aileron, elevator and rudder), the struc-
ture can be changed by touching the check box.
The default structure of helicopter is fixed pitch;
it can be changed to variable pitch by touching
check box. At the same time, the swash plate
type can be set As shown in picture 21.44, mo-
difies the structure of Flysky01, touch setting
model type , after selecting the airplane or gli-
der type, the Flysky01 will reset to default state.
Select throttle needle, two ailerons, two flaps, and
then touch back key. The modified structure will be
as shown in picture 21.45
Pic. 21.43
Pic. 21.44
Pic. 21.45
1.36 Delete Files
1.37 Setting model type
