123
CARSON Reflex Stick Ultimate Touch 500501002
GB
This function can adjust the proportion of the 2 ele-
vators end points and the default is 100%.
There is no this functions if the airplane doses not
have the elevator or 2 elevator linkage. The function
icon will not be shown on the screen. This function
can be set in 5 conditions respectively.
Select the desired “Down” or “Up” and move the
wheel to adjust the corresponding value.
For this example: The airplane has 2 elevators. Adjust
the Down and Up value to 75%. In this situation, the
elevators end points as shown in picture 22.10.
Rudder function is used to adjust the proportion of
the 2 rudders end points and the defaults are 100%.
There is no function if the airplane does not have the
rudder or 2 rudder linkage. The function icon will not
be shown on the screen. This function can be set in 5
conditions respectively.
Select the desired “Down” or “Up” and move the
wheel to adjust the corresponding value.
For this example: The airplane has 2 rudders. Adjust
two rudders‘ value as picture 22.11. In this situation,
the rudder end points will be 80% and 75%.
Pic. 22.10
Pic. 22.11
2.7 Elevator function
2.8 Rudder function
