CARSON Reflex Stick Ultimate Touch 500501002
126
GB
3.0 Helicopter exclusive function menu
This function is used to maintain the throttle
channel position as preset position. The default rate
is 10.0%. Throttle will be in preset position after this
function is applied. It is commonly used to practice
auto-rotation landing.
Touch the throttle hold and move the wheel to
modify the corresponding value. This function can
be assigned to a switch (from SWA to SWH, LSW).
For this example: Throttle hold value is set to 30%
and push the SWA upward to enable this function.
The channel position is displayed at 30 in real time.
Throttle value will not be changed while moving the
throttle stick.
Pic 23.01 Throttle stick to any position. Throttle hold
at 30%
This function is the pre-programmed mix for some
special functions and it can mix aileron channel
elevator channel and rudder channel. The default is
as shown in picture 23.2. This function can be set up
in 5 conditions. For example, in order to not reduce
the height and maintain speed, control the elevator
and increase the throttle output automatically.
Select the desired Down or Up and move the wheel
to modify the corresponding value.
As shown in the picture23.2: The value of the aileron
downside is set as -15% and the value of the upside
is 15%.
Pic. 23.01
Pic. 23.02
3.1 Throttle hold
3.2 Throttle mix
