127
CARSON Reflex Stick Ultimate Touch 500501002
GB
This function is used to adjust the pitch of the helicopter with the collec-
tive pitch to achieve the best flight effect It will be presented with curve
distribution. This function can be set up in 5 conditions respectively, and
the 11 points (L, 2~10, H) of throttle curve can be adjusted from 0% to
100%. The horizontal dotted line displays in real time the throttle stick
position and the vertical dotted line displays in real time the position
of pitch curve output after this function. This function icon will not be
shown if the structure is fix pitch. Select the desired point and move the
wheel to modify the corresponding value.
For this example:
The pitch curve function is activated Point 2 is set to 72% point 3 to -43%
point 4 to 15% and point 5 to 10%,point 6 to 38%,point 7 to 63%,point 8
to 85%,and point 9 to 97%.
This function is the pre-programmed mix control of the helicopter
aileron, elevator and pitch.
Adjust the motion range of these three functions to achieve the best
flight effect. This function can be set in 5 conditions respectively.
Select the desired point and move the wheel to modify the corresponding
value.
There are fixed pitch, variable pitch, throttle needle, gyros copeand
governor for your option if the airplane structure is set as helicopter. The
variable pitch has 6 swash plate types. The default type is the 4-channel
fixed pitch helicopter.
Pic. 23.03
Pic. 23.04
Pic. 23.05
3.3 Pitch curve
3.4 Swashplate mix
3.5 Structure helicopter
