CARSON Reflex Stick Ultimate Touch 500501002
82
GB
Placing of antennas
In order to make sure maximum distance between
the transmitter and receive can be obtained please
follow the directions below:
1. The two antennas must be kept as straight as
possible. Otherwise, control range will be reduced.
2. The two antennas should be placed at a 90 degree
angle to each other, as illustrated in the three
pictures below.
3. The antennas must be kept away from conductive
materials, such as metal and carbon. A distance
of at least 15 cm is required for safe operation.
Conductive materials will not affect the coaxial
part of the antenna, but it is important that the
coaxials are not bent to a severe radius.
4. Keep antennas away from the motor, speed
controller and other noise souces as much as
possible.
Receiver
Coaxial cable
Receiver
Antenna
Antenna
Helicopter example
Airplane example
Receiver
