Page 4 of 25
QUICK TIP
BASIC SET-‐UP
•
Remove all components from carton. Note any damage
with carrier.
•
Assemble the two large wheels. Depress blade on wheel
hub to fully seat wheel onto axle drive collar. The drive
collar is fixed on the axel and has two metal prongs that
insert into the center of the wheel.
•
For “free wheel” mode depress and pull wheel out ¼ of an
inch, making sure it is engaged and attached to the axel.
•
Attach rear “anti-‐tip” wheel.
•
Lift handle and secure with lower locking knob.
•
Extend handle fully and secure in position by lowering
the “upper bag rest”, which is already attached to the
handle.
•
Securely attach antenna to receiver dome on the top of
the handle.
•
Place battery in tray. Insert battery cable into caddy,
making sure to align pins. Depress silver spring lock
before removing cable.
After unpacking the caddy and while reading this manual, place
the battery on charge while you assemble the unit. Plug battery
into charger and charger into power source. The battery may be
delivered with a charge but should always be placed on charge
before using to ensure full charge of battery.
