Cleaning, Operating, Maintenance Instructions, Parts List & Warranty
Heated Carts with TH15
Top Mount Heater
Models Include:
PH188, PH1820, PH1840
with flush door
PH1835 with
non-flush door
RECOMMENDED "TIPS" FOR CLEANING STAINLESS STEEL
Purpose
Frequency
Cleaning Agent
Method of Application
Routine
Daily
Soap, ammonia detergent
Sponge with cloth, rinse with clear water and wipe dry.
cleaning
and water
Smears/
As Needed
Vista, Stainless Shine or
Rub with cloth as directed on package. Rub in direction
fingerprints
similar products
of grain of stainless steel. Do not use on vinyl trim.
Stubborn
Daily
Household cleaners or
Apply with damp sponge or cloth. Rub in direction of polish
spots and
As Needed
Goddards Stainless Steel
lines. Rinse thoroughly after use, especially if cleaner
stains
Care. Revere Stainless
contains chlorine bleach. Do not use on vinyl trim.
Cleaner or similar products.
Hard water
Daily
Vinegar
Swab with cloth. Rinse with water and wipe dry.
spots
As Needed
CAUTION:
Do not use steel wool pads as they will result in rusting from the ferrous metal in the pads.
NOTE:
This equipment has been designed and
manufactured to meet aU applicable health
and safety codes and will give years of
dependable service if used properly. This
cart should be thoroughly cleaned before it
is used.
Cleaning Instructions
1. Before cleaning, unplug heating unit.
2. Racks or shelves are easily removed without tools for cleaning.
Simply lift up and pull out. The tray slides may be hand washed or
run through an automatic washer.
3. If applicable, vinyl trim or laminate should be washed with a chlorine-free
detergent and water. Rinse thoroughly with clear water and allow to dry.
Never use abrasive cleaners, waxes, car polish or substances containing
strong aromatic solvents or alcohol. Caution: When using solvents, it is
essential that proper precautionary measures be observed. Refer to
solvent manufacturer's instructions. Use of direct
steam/hot water
cleaning at temperatures above
190°F
may result in "bubbling" or
loosening of vinyl adhesive.
4. To clean stainless steel surfaces use only cleansers, detergents,
degreasers, or sanitizers that are certified to be "chloride-free" and
"phosphate-free," and cleansers, degreasers, or sanitizers only in the
recommended concentrations.
DO NOT
exceed recommended
concentrations or mixing ratios. After cleaning and sanitizing, rinse all
exposed surfaces thoroughly with large amounts of clean, clear water.
Wipe off any standing liquid or residue from all surfaces, corners, or near
edges,
The heater should
not be exposed to
direct contact with
WARNING
water or cleaning
sprays. Permanent damage to the
electrical components will result.
Cleansers, detergents
degreasers, sanitizers,
or bleaching agents
CAUTION
that contain chlorides
or phosphates will cause permanent
damage to stainless steel products.
The damage appears as pits, eruptions,
voids, small boles, cracks, severe discol-
oration, or dulling of the metal finish.
Water with high chloride content can
also damage stainless steel. If unsure
of your water quality, we recommend
you have it tested. THIS DAMAGE IS
PERMANENT, COSTLY TO REPAIR,
AND
IS NOT COVERED BY THE
WARRANTY.
