a. Check engine oil level. Check for leaks, add oil if required.
b. Check fuel level. Add fuel as necessary and do not overfill. Check for leaks.
c. Check brakes. Depress the rear brake pedal several times, then check for proper brake
pedal freeplay. Make sure there is no brake fluid leakage. Adjust if necessary.
d. Check tires. Check tire condition and pressure. The pressure on both front and rear tires
is 14 psi, respectively.
e. Check drive chain. Check drive chain’s condition and tension. Lubricate if necessary.
f. Check throttle. Check for smooth operation. Assure throttle “snaps” back to idle.
g. Check engine stop button. Perform engine stop button test. Repair as necessary.
h. Check all nuts, bolts, and fasteners. Check wheels to see that all axle nuts and lug nuts are
tightened properly. Check and tighten as necessary all other fasteners to specified condition.
i. Check occupant protection bar. Ensure all occupant protection bars are in place before
operating the kart.
j. Check brake light. Check for proper operation.
k. Check wheels. Check for tightness of wheel nuts and axle nuts; check that axle nuts are
secured by cotter pins.
l. Check steering. Check for free operation for any unusual looseness in any area.
OPERATION
Always follow rules for safe operation and wear a helmet.
Perform this pre-drive inspection everyday before driving vehicle. If not
performed, serious damage to the vehicle or personal injury may result.
B. Pre-Drive Inspection
21
WARNING
WARNING
Summary of Contents for INTERCEPTOR GTR 250
