Cartoni UV-C BOXER, User Manual/Maintenance

9

• Carefully clean all objects from dust and moisture before sanitizing them.

• Do not overload the space on the grid. Objects have to be separated from one 
another, never overlapped. 

• Leave sufficient space between objects in order to allow reflection beams to reach 
every side of the object.

• If you are sanitizing a big piece of equipment which will produce a lot of shade 
on the reflective panels, it is advisable to run two consecutive cycles flipping the 
equipment to ensure each side direct exposure.

• Do not disassemble or modify the 

UV-C LED BOXER

.

• Keep the 

UV-C LED BOXER

 away from children’s reach.

• Delicately dust-off the lamps periodically - at least once a month - with a soft dry 
cloth or Air Spray as dust could reduce the radiation efficiency.

• The 

UV-C LED BOXER

 does not produce Ozone and leaves no residuals.

4. m

oVIng

 & t

rAnsport

Before moving the 

UV-C LED BOXER

, disconnect the power supply cable from the power connector 

❺

, store the power supply and the cable in the organizer compartment in the top lid 

⓬

. 

Do not leave any loose object inside the disinfection compartment to prevent accidental fatal damage 
to the LED modules 

⓭

.

Moving the 

UV-C LED BOXER

 must be done with care. To transport the BOXER from one location to 

another, you may roll it holding it from handle 

⓫

.