Page 12 of 13
The Allen Set Screws should be gently turned on both the front
and back sides an equal amount.
If the Trolley is tracking to the right, (when standing behind
the trolley) turn the rear side of the Allen Set screw counter
clockwise. Turn the front of the Allen Set screw clockwise.
Turn both sides equally.
If the Trolley is tracking to the left (when standing behind the
trolley) turn the front of the Allen Set screw counter clockwise
and turn the rear side of the Allen Set screw clockwise.
Retighten 17 mm cap nut. Test and repeat if necessary.
QUICK TIP
FOR WARRANTY, SPARE PARTS AND ACCESSORIES:
When first using your trolley, practice in a large open area.
Take the time to practice controlling trolley with the start
stop switch on handle and using the distance control function.
