Page 3 of 5
52 Voyager Setup
Part Number 9992007 1/07
52 Voyager Setup
Bridge picking with crane.
Silicone on cabin top strips
Board, wires silicone on strips
NOTE:
If voids were found above patio door in Step
3, apply Great Foam to them.
8. Install sliding salon door, stainless door cap, and
white aluminum drip cap. Seal under drip cap
before installing it.
9. Install cockpit ladder using white 732
multipurpose sealant under bases.
10. Cosmetically seal bridge to deck using silicone
sealant. Use black above windows and air intakes
and white where white meets.
NOTE:
Leave a 3" long void in the forward corner
of white air intake vents for drainage.
11. Run wires under upper helm and hook up wires.
a. Hook up wet bar and icemaker hoses and wire
starboard under seat access.
b. Hook up mastlight, antennas, and radar scanner
if optioned.
c. Install the rest of the under seat dividers.
Silicone on strips
