TOOLS NEEDED FOR INSTALLATION
Tools
- Shovel
- Water hose
- Hammer
- Rubber mallet
- Soil Compactor (manual or mechanic)
- Linear level
- Duct tape 2”
- Pliers
- Vacuum cleaner
- Gardening rake
- Measuring tape
- Nails or rods 8” (number of up1)
- Drill, ratchet or adjustable wrench
- Screwdriver bit #3 Phillips or Robertson
- Hexagonal socket 7/16”
- Wheelbarrow
- Punch 3/16” diameter
- Stepladder
- Vinyl covered hook, rope and tent pegs
Or
- Wall stabilizing hooks (number of uprights)
Required material
-- Sand (see below quantities)
- Patio slab (equal to the # of uprights)
- Prefabricated cove sections (option)
- Under liner pool carpet
- Plywood sheet ½”, (2x) 3’x3’
- Cardboard 16” x 9“
- Wooden plank 2”x4” of length equal to the radius of
the pool
- “CARVIN” pool parts
Pool size (FT)
12'
15'
18'
21'
24'
27'
30'
33'
Sand required (in tons)*
1,5
2
3
3,5
4,5
5
6
7
Pool radius
6’
7’6‘’
9’
10’6’’
12’
13’6’’
15’
16’6’’
Founda�on radius
7’
8’6‘’
10’
11’6’’
13’
14’6’’
16’
17’6’’
Informa�ons required for swimming pool installa�on
*The material required for the foundation should be the finest rock dust possible and can be mixed with sand.
Before starting the installation of your pool, make sure you have all the necessary tools listed below. Check the
contents of each of the boxes containing the parts of the pool and make sure everything is there before starting your
installation. All parts included in the boxes are important and should all be installed. If parts are left out from the
installation, this could cause serious failure of the pool structure. Once the installation of a swimming pool is started,
it should be completed as soon as possible. If a part is missing or defective, please contact your “CARVIN” retailer were
your purchase was made.
40.
