IMPORTANT
MAX. 15 FT
MAX. 15 FT
CARVIN
®
STARFALL| USER MANUAL
3
INSTALLATION
Before starting the installation of your skimmer & return, make sure you have all the
necessary tools listed below. Check the contents in the box make sure everything
is there before starting your installation. All parts included in the box are important
and should all be installed. If parts are left out from the installation, this could cause
serious failure of the skimmer and return. Once the installation is started, it should
be completed as soon as possible. If a part is missing or defective, please contact
your CARVIN
®
retailer where your purchase was made.
TOOLS
• Drill with screwdriver bit #3
• Screwdriver bit #3 Phillips or Robertson
• Small straight screwdriver
• Hand saw
REQUIRED MATERIAL
• Starfall 94114 XXX
• A Star Series Starter kit, to power and control lights;
REQUIRED POOL EQUIPMENT
A basic circulation and filtration system MUST BE INSTALLED. This system includes
the following products by installation order:
• 1 1/2’’ Flexible hose
• PVC-ABS glue
The warranty of the product will be canceled if all installa-
tion requirements and guidelines are not respected.
WARNING
IMPORTANT TO CONSIDER BEFORE INSTALLING
1. Follow the installation steps thoroughly without omitting anything. It can result in
serious accidents.
2. Omitting installation steps may result in a leaking skimmer and/or leaking water
return. Any leak could rust the wall and seriously damage the structure of your pool.
The manufacturer of your product has no responsibility for any omission of the
installation steps contained in this manual or a non-compliant installation.
STARFALL INSTALLATION STEPS
STEP 2
Glue the Carvin quick connect fitting (included in box) on one end of the flexible
hose.
DO NOT CUT THE FLEXIBLE HOSE, FINAL LENGTH WILL BE DETERMINED LATER.
STEP 3
For each selected position, remove the top ledge cover cap.
STEP 4
Unscrew the top ledge cover screw.
Your STARFALL will replace an actual ledge.
Keep in mind that further from the filter you install the
STARFALL less performance your will have.
We recommand to stay in the next 3 top ledges from the
filter for a maximum of 15 ft of hose.
STEP 1
Select the position where you want to install your STARFALL.
