background image

 

 

60

If you know the scale’s IP address and your PC has the registered PC program, you can 
access scale individually or all together to monitor report and update PLUs. 
NOTE: If you have set HUB (Bridge, Repeater, etc...) use PC manager to search 
correspond scales 
 
For setting figure 1, 2 network setup; you must input individual IP address for 
connection test.   
Figure 3 show that  scales are connected via internet; when you know the scale IP 
address, you can access any other network scale. 
 

4. Before setting the network 

 Each scale needs fixed IP address. 

 Do not use DHCP without prior notice to CAS. If so CL-Works will not able to retract 

the right scale because access IP address will change constantly. 

 You need to assign proper IP, Gateway, Subnet Mask address from webmaster. 

    NOTE: These 3 elements are basic information to operate internet / intranet. 

Please get prior training on internet network; otherwise recommend to get advice from 
network management person. 

 You can set scale up to 99 for PC control networking. 

 

 

2.10.2 Network Setting (Menu code 1910) 

 

( MENU 

 Communication 

 Network Setting ) 

 

No 

Sub-menus 

Description 

DHCP 

Dynamic Host Configuration Protocol 

IP 

Setup IP add, subnet, gateway and Port Number.. 

RS232C 

Setting of the b-rate.   

 
2.10.3 DHCP (Menu code 1912) 

 

( MENU 

 Communication 

 Network Setting 

 DHCP ) 

 

Setting Dynamic Host Configuration Protocol

 

 

 

 

This mode for Automatic Private IP Addressing.   
Your network has stable DHCP sever, It is very useful mode. 

Summary of Contents for CL5000J Series
































































































Reviews: