If you want to increase sample size, press the SAMPLE key.
The display shows 10, 20, 30, 40, 50, 100, 150 and 200 every
time pressing the SAMPLE key.
If you set sample size to 10, place 10 samples on the platter.
3. Counting Mode
If you want to count parts, first you have to set sample size.
Press the MODE key until the display shows “PCSSET”. Make
sure that COUNT lamp is on. If you have set sample size before,
the display shows “0”.
Press the SAMPLE key, then
the display shows “10”.
or
9
2. Weighing with Tare
Tare is the weight of container being used for a commodity.
The TARE key subtracts the weight of the container.
Place the container on the
platter.
Press the TARE key, NET
lamp is on.
Place an item in the
container.
To release the TARE function,
remove an item and container
from the platter and press the
TARE key.
1. General Weighing
The display indicates if the scale is at zero or if there is a tare entered into the
scale by way of a ZERO and NET.
OPERATIONS
Turn on the power.
The display shows 0.00.
Make sure that STABLE and
ZERO lamps are on.
When the display is not zero
though there is nothing on
the platter, press the ZERO
key.
Place an item on the platter.
When the STABLE lamp is
on, read the weight.
8
POWER
PRINT key.
[
] Used to have number down.
Used to turn ON or OFF the power.
DESCRIPTIONS
KEYS
