18
19
ERROR MESSAGES
To help the customer’s understanding, this scale warns the error messages
properly. Please refer to error table.
SPECIFICATIONS FOR CE MARKING
2. Electrical conditions for LVD(Low Voltage Directive) testing.
Power source : AC 220V ~ 240V 50Hz, 50mA, 10W
Insulation class : I
3. Environment Conditions for non-automatic weighing instrument.
This product is intended to be “indoor use”.
Altitude : less 2000m
Temperature range : -10
~
40
II
Pollution degree : II
4. Capacity : 6
0.002kg, 15
0.005kg, 30
0.01kg
5.The socket-outlet shall be installed near the equipment and shall be easily
accessible.
6. Do net pour water directly on the scale. Spray any cleaning liquids onto the
cloth rag you are using to wipe the scale clean.
7. Changes or modifications not expressly approved by manufacturer for
compliance cluld void the user’s authority to operate the equipment.
; Above statements can be applied to product with CE MARKING.
An error of the initial zero range
An over flow was occurred from
ADD key
An over flow of the transaction count
Failure of the analog module
Failure of the digital module
Condition codes are broken
Key codes are broken
Set the platter empty
Press C key
Press C key
Call your CAS dealer
Call your CAS dealer
Call your CAS dealer for span calibration
Call your CAS dealer for span calibration
ERROR REASONS
SOLUTIONS
Err 1
Err 6
Err 8
Err 10
Err 11
Err 12
Err 13
SPECIFICATIONS
MODEL
CAPACITY
DISPLAYS:
WEIGHT
UNIT PRICE
TOTAL PRICE
DISPLAY DESIGNATORS
MAXIMUM TARE
POWER SOURCE
POWER CONSUMPTION
TEMPERATURE RANGE
DIMENSIONS(mm)
PRODUCT WEIGHT
HS - 1
6
0.002 kg
15
0.005 kg
30
0.01 kg
Vacuum Fluorescent Display
6 DIGITS or 7 DIGITS
5 DIGITS
6 DIGITS
ZERO, NET
-6.000 kg
-9.995 kg
-9.990 kg
AC 110 / 120 / 220 / 240 V, 50 / 60 Hz
APPROX. 10 W
10°C
40°C
260(W)
110(D)
368(H)
3.6 kg
1. Symbol Description
Summary of Contents for HS-1
Page 1: ...HS 1 Hanging Scale OWNER S MANUAL ...
Page 11: ...MEMO ...
