29
28
4) The display shows “S kEy 0”. Press the Preset key (1 to 54) you wish to program. The
number in the UNIT PRICE display is the number of the Preset key you have just pressed.
The number in the TOTAL PRICE display is the PLU number that has been assigned to
that Preset key.
5) Type the number of the PLU you wish to assign to that preset key. Press the PRT/* key
when done.
6) If you want to program another preset key go back to step 2). If you wish to finish
PROGRAM mode press the C key
4.4 Message (Ingredients) Programming
LP 1.6 is able to have maximum 1000 messages. Each message has up to 8 lines of text and
each line contains up to 50 characters.
1) To go to PROGRAM mode press 10000 by using numeric keys and VOID key.
2) Press
key two times. The display shows “MSG”.
3) Press PRT/* key. The display shows “MSG 1000 ”.
4) Type the number of the MSG you wish to program or edit using the Numeric Keypad.
Remember, the number can be from 1 to 1000. If you make any mistakes press the C key
and repeat step 4.
5) Press the PRT/* key. The display shows : “MSG 01.01”. You may now begin typing your
MSG data using your Alpha-numeric keypad. Each message has 8 lines of text and each
line contains 50 characters.
After you type each line press ENTER key when you are done typing a line. If you wish to
skip a line press the
key. If you want to go up a line, press the
key. Press
key or
key to scroll left or right on a line of text. As you type you will see the text scroll in the
TOTAL PRICE display.
6) When you are done press PRT/* key, the display shows “SAvE” and then press the PRT/*
key. If you do not want to save it press
key, the display shows “ESC” and then press the
PRT/* key. If you want to edit it press
key until the display shows “Edit” and then press
the PRT/* key.
7) If you wish to program another MSG go back to step 2). If you wish to finish PROGRAM
mode press the C key
4.5 Programming
The header or head data is two lines of commodity name that appears on a label when you
generate a Non-PLU label.