8 .X and Z Modes
72
Whenever you are using an override price the display will show the override status to the left of the
time/date display.
The
Ride
message on the upper
right side of the display indicates
that you are using an override
price.
7.2.17 DEPT key
The
DEPT
key is used to temporarily change the department assignment of the scale. That is, if a scale is
assigned to department 1 then all of the PLUs that you select on that scale will be from department 1;
however, if you want to select a PLU from another department, then you can use the
DEPT
key.
Press the
DEPT
key. If you are in REG mode the scale will prompt you for a level 2 password; MGR mode
will not display a password entry screen. If you are in REG mode, enter the password and then press the
key. The Change Department screen will appear.
The
New Department
entry field will
default to have the same number
as the Old Department field. The
Old Department field indicates the
scale’s assigned department; the
New Department field allows you
enter the temporary department
you wish to change to. Press the
key after you select the
temporary department.
The display will return to the sales mode screen. The time/date field will show
◀
DEPT#: 2
where the
asterisks indicate that you are in a temporary department assignment state. You can press the
DEPT
key to cancel the temporary department assignment or proceed with a transaction. After a
transaction, the scale will revert to its programmed department assignment.
<REG> Ride 12:14:19 PM
Delicious Golden Apple
WEIGHT lb
UNIT $ /lb
TOTAL PRICE $
◀
○
< CHANGE DEPARTMENT >
Old Department: 1
Bakery Department
New Department:[ 2]
