CAS LP-II Service Manual Download

Page: 26 / 89

5 Getting Started

< CAL: MAIN MENU >

1. CALIBRATION

5. NETWORK OPTIONS

2. SYSTEM OPTIONS

6. SELF TEST

3. DIGITAL FILTERING 7. NORMAL FUNCTION
4. PRINTER SETTINGS 8. PRICE OPTIONS

NUMERIC

< CAL: SAMPLE ENTRY SCREEN >

Unit :[1] 0)kg

1)lb

Label Format (1-999):[123] LST #8020 Ingredient
Unit Price

:$[ 0.99] / lb

.2 Menu and Data Entry System

Enter Calibration Menu, hold

ing

he CAL Main Menu screen looks

Pressing ESC from this menu

ill take

enus & Sub-Menus:

down the ON/OFF key while turn

on the power

like this:

you out of CAL mode and

effect all of the changes that you

may have made.

Any menu or sub-menu screen that you access can be exited by pressing the ESC

ill

ntry Screens:

key. This will take you back to any previous menu or sub-menu except if you press ESC from the CAL

Main Menu. The picture above is an example of a menu. Any menu that you access by selecting
options 1 to 5 will be a sub-menu of CAL Main Menu. Any menu that you access from a sub-menu w

be a sub menu of that menu, etc. This way you can always backtrack to the CAL Main Menu by

pressing the ESC.

An example of an

the

int. Pressing the ENTER key while the cursor is on the last field (bottom)

ields (on-screen):

entry screen is shown here. If you
access an entry screen you can

exit it without making changes by

pressing the ESC key. This will
have the effect of returning to

previous screen, menu, or sub-

menu, whatever be the case.
you are on an entry screen you

can save & exit that screen by

pressing the SAVE key at any po
of an entry screen will have the same effect as pressing the SAVE key.

Entry screens have fields that contain data that you can modify. This data is always

the left side of the bracketed data. In

ld indicates its range in parenthesis listed after

e fiel

this is a $

lue.

contained in brackets:

[123456]

[ABCDEDG ]

. To select a field, simply use the

↑

↓

keys to

move the cursor to that field.

•

A field’s name followed by a colon will usually appear on

the Sample Entry Screen above, the word “Unit :” appears to the left of the brackets containing the

value 1. To the right of the Unit field is the options that you may select: 0 is kilograms & 1 is pounds.
These are the only two acceptable values for this field. Any values selected outside that range will

automatically replaced with values within that range.

•

The Label Format Field is slightly different. This fie

d’s name. In this case it is 1 to 999. Also, the data that appears to the right of the entry field

brackets changes dynamically as you type. For example, if the cursor is on the Label Format field an

you press the CLEAR key you will see that the format number will change to 1 and the name of label 1
will appear on the right side of the brackets. If you press the 1 key & then the 2 key, then the name of

label 12 will appear. If you now press the 3 key then the name of label 123 will appear.

•

The Unit Price field tells you that the values are in 2 decimal place format and that

The right side shows “ / lb” which means that this is a $ per pound field.