6 of 63
CFW-2132 – User Guide
UG01228 v1.0 April 27, 2020
© Casa Systems 2020
Overview
Introduction
This document provides all the information
required
to configure and deploy the Casa Systems CFW-2132
antenna.
This User Guide relates to the CFW-2132’s physical components and its web user interface.
Normally only the installing technician would require access to the CFW-2132’s web user interface, if at all.
End users would not normally ever need to access this web user interface and would probably be unaware
of it.
Ordinarily a customer/end user’s connection to the internet would be exclusively governed by the settings
of their
Wi-Fi Gateway
, see Figure 3. Those settings would depend on the model or brand of gateway, type
of connection, requirements of the service provider, etc. and are beyond the scope of this document.
Target audience
This document is intended for experienced hardware installers who understand telecommunications
terminology and concepts.
Prerequisites
Before continuing with the installation of the CFW-2132 antenna please confirm that you have:
A WiFi-enabled device (laptop, tablet or smartphone) with the Google Chrome™ browser or the
Safari® browser.
read the entire Safety and product care section of this document and RF Exposure information.
You may also require other screws and fasteners depending on your circumstances.
Notation
The following symbols may be used in this document:
Note
–
This note contains useful information.
Important
–
This is important information that may require your attention.
Warning
–
This is a warning that may require immediate action in order to avoid damage or injury.
