Casablanca Durant 54101 Manual Download

Page: 12 / 14

www.CasablancaFanCo.com

1.888.227.2178

Light Kit (continued)

Note:

Glass shade style and number of lights may vary.

See next page for fan
operation instructions.

Press the bowl and glass holder

flush against the metal plate.

Thread the light pull chain

through the hole in the center of

the finial cap and thread the fan

pull chain through the grommet

hole in the side of the finial cap.

Bowl

Glass

Holder

Finial Cap

Finial

Thread the light pull chain

through the hole in the finial and

screw the finial onto the threaded

rod. Connect the pull chain

pendants to the short chains

coming from the fan.

Be sure to turn the

power back on at

the breaker and the

switch before trying

to operate fan.

Turn P

CONGRATULATIONS!

YOU’RE DONE!

Light

Pull

Chain

Fan

Pull

Chain

Summary of Contents for Durant 54101















Search results

Summary of Contents for Durant 54101

Reviews:

Related manuals for Durant 54101

Brands by name

Popular brands

Casablanca Durant 54101, Manual

Search results

Summary of Contents for Durant 54101

Reviews:

Related manuals for Durant 54101

Brands by name

Popular brands