Casablanca Durant 54101 Manual Download

Page: 13 / 14

www.CasablancaFanCo.com

1.888.227.2178

M6017-01 • 04/11/13 • © Casablanca Fan Company

Maintenance, Operation & Cleaning

For questions regarding removing a light kit, call

customer service

1-888-227-2178.

Be sure to turn off

the power to the fan

before performing

any maintenance or

relamping.

OFF

Turn P

Cleaning the fan - Use soft

brushes or cloths to prevent

scratching. Cleaning products

may damage the finishes.

Changing the bulbs - Unscrew

the finial and remove it from the

threaded rod. Remove the finial cap

and unscrew the globe keeper while

supporting the globe with your other

hand. Carefully remove the globe.

Unscrew bulbs and replace with

bulbs of same type and wattage.

Reinstall the globe assembly.

Changing the direction of air
flow - Move the reverse switch

to the opposite position.

Reverse

Switch

Bowl

Glass

Holder

Finial Cap

Finial

Summary of Contents for Durant 54101















Search results

Summary of Contents for Durant 54101

Reviews:

Related manuals for Durant 54101

Brands by name

Popular brands

Casablanca Durant 54101, Manual

Search results

Summary of Contents for Durant 54101

Reviews:

Related manuals for Durant 54101

Brands by name

Popular brands