6
MOTOR HOUSING INSTALLATION
HANGING
HOLE
Figure 3
Step 2d.
Use the hanging hole on the body of the fan
to hang the fan on the hook of the ceiling mounting
plate. This will help you in making the electrical
connections as shown in Figure 3 and Figure 4.
Step 2a.
Unlock the canopy cover from the canopy
ring tabs to loosen and bring down to fan body as
shown in Figure 1.
Step 2b.
Remove the fan mounting screws from the
fan body and set aside. You will use these later.
Step 2c.
Remove the shipping plate from the top of
the canopy. Figure 2.
CEILING HARDWARE
(not to scale)
Wire Nuts (3)
Canopy Screws (4)
Figure 1
CANOPY
RING
Fan Body
Figure 2
CANOPY
RING
HOOK
