9
M
M
M
M
M
IDDLE
IDDLE
IDDLE
IDDLE
IDDLEB
B
B
B
BUR
UR
UR
UR
URY
Y
Y
Y
Y
™
™
™
™
™
Light Assembly Installation
Step 11a.
Using the light assembly screws in Pack E and
the provided screwdriver, insert three screws into the light
assembly adapter plate, as shown and tighten
by hand only
.
Step 11b.
Connect the light assembly connector to the
motor connector.
Step 11c.
Carefully tuck in the wires and align the keyhole
slots in the light assembly with the three screws in the
adapter plate. Turn counterclockwise to align the keyhole
slots with the three screws.
Step 11d.
Securely tighten all three screws
by hand only
using the provided screwdriver.
Install Incandescent Lightbulbs
Step 12.
Screw in two 60-watt type A15 medium base
lightbulbs.
NOTE:
When replacing lightbulbs, be sure to use only
60-watt maximum.
Glass Installation
Step 13a.
Remove the finial from the light assembly.
Step 13b.
Insert the threaded rod from the light assembly
through the hole in the glass shade as shown.
Step 13c.
Twist the finial onto the threaded rod. Tighten
securely.
LIGHT FIXTURE INSTALLATION
SWITCH HOUSING HARDWARE
(not to scale)
Light Assembly
Pack E:
Light Assembly Screws (3)
Downlight Lightbulbs
A-15 60-watts
CAUTION:
Overtightening the finial can cause the glass to
break.
Glass Shade
