FILE NAME ( SM_ZEPHAIR FLOOR FAN ) RAS 4-13-04
761 Corporate Center Dr. • Pomona, CA 91746 • (909) 689-1477 • (800) 498-8482
6a. To sleect a speed on the table model move
the switch lever located on the base of the
fan from OFF to the desired speed setting of
1 (low), 2 (medium) or 3 (high).
6b. To select a speed on the floor model, move
the switch knob located on the back of the
motor housing from OFF to the desired speed
setting of 1 (low), 2 (medium) or 3 (high).
Table & Floor Fan Only
7. OPTIONAL: To store the excess cord, unplug
the fan from the wall socket and gently lay
the fan on its side, making sure that the cage
and motor are properly supported. To remove
the base bottom unscrew all of the screws.
Remove the cord restraint screw. Gently pull
the cord through the bottom rubber bushing
(assuring it remains in place) and through the
cord restraint until you have the desired
length. If the rubber bushing in the base has
come loose, reinstall it into the base of the
fan. Re-align the cord restraint to the proper
position to reattach it to the base with the
screw. Feed the excess cord into the neck of
the base. For the table fan, keep it away from
the speed switch assembly. Replace the base
bottom, aligning the screw holes and reinstall
the screws, assuring that no wires or cord
are pinched.
Operationg Instructions
.
(Continued) -
RUBBER
BUSHING
CORD
RESTRAINT
SPEED
SWITCH
ASSEMBLY
CORD
RESTRAINT
SCREW
SCREWS
FOR TABLE & DESK
FAN:
FOR FLOOR FAN:
USER MAINTENANCE & CLEANING
This fan is permanently lubricated and will not require additional lubrication (oil) for the life of the fan. This appliance
requires little maintenance and contains no user serviceable parts. Do not try to fix it yourself. Call toll free 1-888-227-2178
and ask a technician for the closest Authorized Casablanca Service Center or visit our web site at
www.CasablancaFanCo.com, click on ‘Dealers’ then follow the directions (making sure to select ‘Service Center’ in
option 3).
TO CLEAN:
Before cleaning, turn off the fan and unplug from electrical outlet. Wipe off excess dust with a lint-free
cloth. To ensure adequate air circulation to the motor, keep vents located at the rear of the motor housing free from
dust accumulation. A vacuum cleaner hose can be used to clear these vents. Do not immerse the fan in water or any
other liquid.
WARNING: DO NOT OPERATE
FAN WHILE CAGE IS REMOVED
FOR CLEANING!
User Maintenance & Cleaning
.
(Continued) -
IX - 6.4
