Assembly Stage #6
1. Please remove the four sets of
screws (K-1)
from the
pedal arms (K-L/R).
2. Assemble the front cover L/R (K-2, K-4) to the pedal arms (K-L/R) by adding screws (K-1) on each
side.
3. Pass the hand-pulse wire (B-6) through the handlebar post (D) hole.
4. Attach the front handlebar (B) to the handlebar post (D) using the clamp cover (L-17), then
fix it with two flat washers (L-17), two spring washers (L-19) and two fixing bolts (L-20).
6
L-18
L-17
L-19 L-20
Ø7xØ12x1t
Ø7x2T
x1
L-17
L-18
L-19
M7xP1.0x30L
x2
L-20
x2
x2
