Assembly Stage #3
1. Put the R/L pedal (K-5, K-6) onto the pedal arm (K-L/R) and tighten it using a knob (L-12), flat
washers (L-21), spring washers (L-13), sleeves (L-11) and carriage screws (L-14) on each
side.
Please keep in mind, the left and right pedals need to be placed in identical positions.
Assembly Stage #4
1.
Please remove the four sets of Allen bolts (F-13) and flat washers (F-12) and spring washer
(F-32) from the main frame (F).
2. Take the handlebar post (D) and pass it through the handlebar post cover (F-7).
3.
Hold the handlebar post (D) and connect the lower console cable (F-11) and the upper
console cable (D-1).
4.
Slide the handlebar post (D) into the main frame, then fix it with four sets of Allen bolts (F-13)
and flat washers (F-12) and spring washer (F-33).
Ø6x1.5T
x8
x4
Ø7xØ12x30L
L-11
L-13
M6xP1.0x50L
x8
L-14
3
L-11
L-12
L-12
L-13
L-14
L-21
L-21
M6xP1.0
x8
Ø6xØ13x1t
x4
L-21
L-12
K-L
K-R
M8xP1.25x16L
x4
Ø8xØ19x2t
x4
4
F-12
F-13
