EXPLANATION FOR SYMBOLS
A Class II or double insulated electrical appliance
is one which has been designed in such a
way that it does not require a safety connection
to electrical earth. The basic requirement is that
no single failure can result in dangerous voltage
becoming exposed so that it might cause
an electric shock and that this is achieved without
relying on an earthed metal casing. This is
usually achieved at least in part by having two
layers of insulating material surrounding live
parts or by using reinforced insulation
Read instruction manual before operating or attempting
any maintenance work.
Switch off and remove the plug from the mains before
cleaning or maintenance.
DO NOT leave or use this appliance in the rain.
Wear hearing and eyes protection.
The numbers in the test below refers to the diagrams
labelled Fig. A, Fig. B and Fig. C
Contents
1. Machine Information
2. Safety Instructions
3. Mounting Accessoties
4. Operation
5. Service & maintenance
Machine Information
Technica Specifications
Voltage
: 230 - 240V
Frequency
: 50Hz
Power input
: 500W
No load seed
: 16000/min
Air blow rate
: 2.5m3/s
Weight:
: 1.5kg
Sound pressurec (Lpa) : 86.9 + 2 dB(A)
Sound pwer (Lwa)
: 96.15 + 3 dB(A)
Vibration
: 3.5 + 1.5m/s2
Vibration Level
The vibration emission Level stated in this Instruc-
tion Manual has been measured in accordance with a
standardised test given in IEC 60335. It may be used
to compare one tool with another and as a preliminary
assessment of exposure to vibration when using the
tool for the applications mentioned.
Summary of Contents for B500E
Page 6: ...R1200E...
