Casals CCH26REAK, Manual

This symbol means that in case you 

wish to dispose of the product once its 

working life has ended, take it to an 

authorised waste agent for the selective 

collection of Waste from Electric and 

Electronic Equipment (WEEE).

This symbol means that user 

must to consult instructions 

thoroughly before use.

Double insulation

  Declaration of conformity

We hereby declare, under our own responsibility, that the 

CASALS

 products described in this manual CCH26REAK 

complies  with  the  following  standards:  EN  60745-1,  EN 

60745-2-6,  EN  55014-1,  EN  55014-2,  EN  61000-3-2,  EN 

61000-3-3  and  and  EN  62321    in  accordance  with  EU 

Directives 2004/108/EC, 2006/42/EC and 2011/65/EU.

Alberto Tomas. 

Commercial Manager

Oliana, 12/12/2014

6

- To modify the position of the chisel turn the selector 

(C) until points to ( 0 ). Rotate the chisel until the desired 

position and turn the selector (C) until points to (   )

Electronic speed control:

- The speed of the appliance can be regulated by using 

the speed regulator control (H). This function is very 

useful, as it makes it possible to adapt the speed of the 

appliance to the type of work that needs to be done.

- If the appliance works continuously at low speed, 

working life of the appliance will be reduced considerably.

Locking button:

- Activating the locking button allows you to operate the 

appliance without having to depress the run button

- To activate this function press button (I) while holding 

down the run button (H).

- To deactivate this function press the run (H) button 

right down.

Once you have finished using the appliance:

- Stop the appliance by releasing the on/off switch (H).

Cleaning

-

Disconnect the appliance from the mains and allow it to 

cool before undertaking any cleaning task.

- Allow it to cool before undertaking any cleaning task.

- Clean the electrical equipment and the mains 

connection with a damp cloth and dry. DO NOT 

IMMERSE IN WATER OR ANY OTHER LIQUID.

- Clean the equipment with a damp cloth with a few drops 

of washing-up liquid and then dry.

- Do not use solvents, or products with an acid or base 

pH such as bleach, or abrasive products, for cleaning 

the appliance.

- Do not let water or any other liquid get into the air vents to 

avoid damage to the inner parts of the appliance.

- Never submerge the appliance in water or any other 

liquid or place it under running water.

- If the appliance is not in good condition of cleanliness, its 

surface may degrade and inexorably affect the duration of 

the appliance’s useful life and could become unsafe to use.

Supplies

- Always use original supplies, designed specifically for 

your appliance model.

- These supplies are available in specialist shops. 

 Anomalies and repair

- Take the appliance to an authorised technical support 

service if a product damage or other problems arise. 

Do not try to dismantle or repair without assistance, as 

this may be dangerous. 

- If the connection to the mains has been damaged, 

it  must  be  replaced  and  you  should  proceed  as  you 

would in the case of damage.

Specifications:

CCH26REAK

- Rated power (W): 

800

- Rated Voltage   

230V~

- No load speed (rpm): 

0-1200

- Blows per minute (ipm) 

0-5300

- Impact Energy (J) 

2,8

- Maximum capacity in concrete (mm) 

26

- Weight (Kg:)     

2,9

- Sound Pressure level 

 (LpA) = 89.86 dB(A), KpA = 3 dB

- Sound Power level  

  (LwA) = 100.86 dB(A), KWA = 3 dB

- Vibration     

13.60 m/s2, K= 1.5 m/s2

- Not suitable for use in presence of flammable anaesthetic 

mixture  with  air  or  with  Oxygen  or  nitrous  oxide 

NB: These specifications are subject to change without 

notice of purpose of improvement.

Wear hearing protection

-Measured sound level determined according EN60745

-The vibration emission level given in this information 

sheet  has  been  measured  according  EN60745  and 

may be used to compare one tool with other. It may be 

used for a preliminary assessment of exposure

-The vibration value during actual use of the power tool 

can differ from the declared total value depending on 

the way in which tool is used.

-It’s necessary identify safety measures to protect the 

operator that are based on an estimation of exposure in 

the actual conditions of use (taking account of all parts 

of the operating cycle such as the times when the tool 

is switched off and when it is running idle in addition to 

the trigger time).

For EU product versions and/or in case that it is 

requested in your country:

Ecology and recyclability of the product 

- The materials of which the packaging of this appliance 

consists are included in a collection, classification and 

recycling system. Should you wish to dispose of them, 

use the appropriate public recycling bins for each type 

of material.

-  The  product  does  not  contain  concentrations  of 

substances  that  could  be  considered  harmful  to  the 

environment.