Casals CCH32VCEK, Original Instructions Manual

7

Penetrating a water line causes property damage or may 

cause an electric shock.

- Do not touch the bit during or immediately after operation. 

The bit becomes very hot during operation and could cause 

serious burns.

- Do not use the power tool with a damaged cord. Do not 

touch the damaged cord and pill the plug. 

- Immediately unplug the plug from the main electricity in the 

case that the cord gets damage and during maintenance.

Warning: 

Reduce the working time to avoid risks related 

with too much vibration.  

Description

(CCH32VCVEK, CCH40VCEK, CCH48VCEK)

A  

SDS Max Chuck

B  

Chuck sliding ring

C  

Function Selector

D  

Handle

E  

Auxiliary handle

F  

Depth Gauge

G  

Variable speed button

H  

Start-up switch

I   

Oil tank lid 

(Only CCH32VCEK and CCH48VCEK)

J  

Power indicator and carbon brush indicator  

(Only CCH32VCEK and CCH48VCEK)

K 

Wing (Only CCH32VCEK)

Installation

Auxiliary Operation (CCH32VCEK)

- Operate the appliance only with the auxiliary handle.

- Turn the auxiliary handle (E) in counter clockwise direction 

for adjustment.

- Set the auxiliary handle on the appliance into the required 

position.

- The depth can be set with the depth stop (F). Thereby 

loosen the winged screw (K)

- Set de required drilling depth.

- Tighten the winged screw (K).

- Tighten the auxiliary handle (E) by turning it in clockwise 

direction.

Auxiliary Operation (CCH40VCEK and CCH48VCEK)

- Operate the appliance only with the auxiliary handle.

- Turn the auxiliary handle (E) in counter clockwise direction 

for adjustment.

- Set the auxiliary handle on the appliance into the required 

position.

- The depth can be set with the depth stop (F).

- Do not use the appliance if it has fallen on the floor, if there 

are visible signs of damage or if it has a leak. 

- CAUTION: Maintain the appliance dry.

- CAUTION: Do not use the appliance near water.

- Do not use the appliance with damp hands or feet, or when 

barefooted. 

- Do not wrap the power cord around the appliance.

- Do not clip or crease the power cord.

- Check the state of the power cord. Damaged or tangled 

cables increase the risk of electric shock.

-  Do not touch the plug with wet hands.

- Fully unroll the appliance’s power cable before each use.

- Do not use the appliance if its accessories are not properly 

fitted.

- Do not use the appliance if the accessories or consumables 

attached to it are defective. Replace them immediately.

- Use the appliance handle/s, to catch it or move it.

- Keep the appliance in a dry, dust-free place, out of direct 

sunlight. 

- Do not use the appliance on any part of the body of a 

person or animal.

- If the application tool should become blocked, switch the 

machine off. Loosen the application tool.

- Before switching on the power tool, make sure that the 

application tool moves freely. When switching on with a 

blocked drilling tool, high torque reaction can occur.

- Use clamps or a vise to secure the object to be worked 

in place. The work will be safer if both hands are free to 

control the tool.

- Let the appliance running with no load for 30 seconds in a 

safe position. If you notice serious vibration or other defects 

stop the appliance immediately. Then check the problem 

and /or proceed as we describe on Anomalies and Repair 

clause.

- When working in amianthus/asbestos and/or silica stone, 

the dust produced is extremely harmful to your health. Wear 

protection against inhalation of this dust, in compliance with 

current regulations on accident prevention.

- This appliance is for professional use.

- This appliance is not a toy. Children should be supervised 

to ensure that they do not play with the appliance.

- Do not expose the appliance to extreme temperatures.

- Check the position of power cables before commencing 

work ensuring they are well away from the work area.

- Keep hands and other body parts well away from the work 

area whist the tool is in use. 

- Always hold the body handle and side handle of the 

power  tool  firmly.  Otherwise the counterforce produced 

may result in inaccurate and even dangerous operation.

- Use suitable detectors to determine if utility lines are 

hidden in the work area or call the local utility company for 

assistance. Contact with electric lines can lead to fire and 

electric shock. Damaging a gas line can lead to explosion. 

- Set de required drilling depth.

- Tighten the auxiliary handle (E) by turning it in clockwise 

direction.

  Instructions for use

Before use:

- Make sure that all the product’s packaging has been 

removed. 

- Prepare the appliance according to the function you wish 

to use:

Fitting the working tools: (Fig. 2)

- Unplug the appliance from the mains.

- Only use tools with SDS-Max shaft.

- Clean and grease the shaft of the tool.

- Insert the tool by moving the sliding ring (B) back. Now the 

SDS-Max chuck is open.

- Install the tool in. Turn it slightly until it can be pushed in all 

the way and you can feel it engages into place.

- Release the sliding ring (B). Now the tool is locked.

Use:

- Connect the appliance to the mains.

- Select the appliance function desired.

Hammer drilling with rotation

- Turn the selector (C) until points to (

).

Chiseling (CCH32VCEK)

- Turn the selector (C) until points to ( ).

- To modify the position of the chisel turn the selector (C) 

between position (

) and ( ). Rotate the chisel until 

the desired position and turn the selector (C) until points 

to ( ).

Chiseling (CCH40VCEK)

- Turn the selector (C) until points to ( ).

- To modify the position of the chisel turn the selector (C) 

until points to (O). Rotate the chisel until the desired position 

and urn the selector (C) until points to ( ).

Chiseling (CCH48VCEK)

- Turn the selector (C) until points to ( ).

- To modify the position of the chisel turn the selector (C) 

until points to ( ). Rotate the chisel until the desired 

position and turn the selector (C) until points to ( ).

- Place the appliance against the surface you want to work.

- Press the appliance until the lengthways play is taken up.

- Turn the appliance on, by using the on/off button (H).

Note: Exerting high pressure does not increase machine 

effectiveness!