damaged, it must be replaced and you should
proceed as you would in the case of damage.
Specifications:
CRH10REA / CRH10REAK
- Rated power (W):
400
- Rated Voltage:
220-240V~
- No load speed (rpm):
0-1500
- Blows per minute (ipm)
0-3600
- Maximum capacity in concrete (mm):
10
- Maximum capacity in steel (mm):
13
- Maximum capacity in wood (mm):
20
- Reversible / Electronic
yes
- Weight (Kg:)
1,7
- Acoustic pressure level (dB(A))
< 90,5
- Vibration (m/s2)
< 11
- Not suitable for use in presence of flammable
anaesthetic mixture with air or with Oxygen or
nitrous oxide
NB: These specifications are subject to change
without notice of purpose of improvement.
For EU product versions and/or in case that it is
requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate public
recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to the
environment.
- This appliance contains, or could contain,
oil. Remember that one should abide by the
regulations concerning the elimination of this type
of contaminant.
- This symbol means that in case you wish to
dispose of the product once its working life has
ended, take it to an authorised waste agent for
the selective collection of Waste from Electric
and Electronic Equipment (WEEE).
- This symbol means that user must
to consult instructions thoroughly
before use.
Wear safety glasses.
Wear hearing protection while
operating the appliance.
Double insulation
Declaration of conformity
We hereby declare, under our own responsibility,
that the CASALS products described in this manual
CRH10REA / CRH10REAK complies with the
following standards: EN 60745-1, EN 60745-2-6,
EN 55014-1, EN 55014-2, EN 61000-3-2 and
EN 61000-3-3 in accordance with EU Directives
2006/42/EC and 2004/108/EC.
Alberto Tomas.
Commercial Manager
Locking button:
- To activate this function press button (J) while
holding down the run button (H).
- To deactivate this function press the run (H)
button right down.
Once you have finished using the
appliance:
- Stop the appliance by releasing the on/off switch.
Cleaning
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQUID.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- If the appliance is not in good condition
of cleanliness, its surface may degrade and
inexorably affect the duration of the appliance’s
useful life and could become unsafe to use.
Supplies
- Always use original supplies, designed
specifically for your appliance model.
- These supplies are available in specialist
shops.
Anomalies and repair
- Take the appliance to an authorised technical
support service if a product damage or other
problems arise. Do not try to dismantle or repair
without assistance, as this may be dangerous.
- If the connection to the mains has been
