in personal injury.
•Do not over reach. Keep proper footing and
balance at all times. This enables better control
of power tools or garden power tools in unex
-
pected situations.
•Dress properly. Do not wear loose clothing or
jewellery; Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewel
-
lery or long hair can be caught in moving parts.
•Do not force the power tools or garden power
tools. Use the correct the power tools or garden
power tools for your application, The correct
power tools will do the job better and safer at
the rate for which it was designed.
•Do not use the power tools or garden power
tools if the switch does not turn it on and off.
Any the power tools or garden power tools that
cannot be controlled with the switch is danger-
ous and must be repaired.
•Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories, or storing the power tools or garden
power tools. Such preventive safety measures
reduce the risk of starting the power tools or
garden power tools accidentally.
•Store out of the reach of children and do not
allow persons unfamiliar with the power tools
or garden power tools or these instructions to
operate the power tools or garden power tools.
Power tools or garden power tools are danger-
ous in the hands of untrained users.
•Use the power tools or garden power tools, in
accordance with these instructions and in the
manner intended for particular type of power
tools or garden power tools, taking into ac-
count the working conditions and the work to
be performed.
•Use of the power tools or garden power tools
for operations different from intended could re-
sult in a hazardous situation.
•Have your power tools or garden power tools
serviced by a qualified repair person using only
identical replacement parts. This will ensure
that the safety of the power tools or garden
power tools is maintained.
Safety Rules for Orbital Sanders
WARNING
Read this manual carefully before using the ma-
chine, for your own safety.
SAFETY INSTRUCTIONS
When using the machine, always observe the
enclosed safety instructions as well as the ad-
ditional safety instructions.
ELECTRICAL SAFETY
Always check that the power supply corre-
sponds to the voltage on the rating label
Description:
1. On/Off Switch
2. Trigger Locking button
3. Rear Handle
4. Abrasive paper clamp
5. Base Plate
6. Front Handle
7. Dust extraction vent
8. Punch plate
ADDITIONAL SAFETY INSTRUCTIONS FOR
SANDERS
•Observe the applicable regulations when
sanding painted surfaces.
•Whenever possible, use a vacuum extractor
for dust collection.
•Remove dust and other waste matter in an en
-
vironmentally safe way.
•Always wear a mask specially designed for
protection against paint dust and fumes.
Punch Plate
• The punch plate accessory provided allows
for the user to punch holes in standard sand
paper which is not already punched.
1
7
6
5
4
3
2
8
OS150-Obital Sander.indd 3
2013/04/18 11:47:37 AM
