Casals VLIXS36, Manual

safety shoes, hardhat, or hearing protection used for 

appropriate conditions will reduce personal injuries.

- Take the necessary measures to avoid starting the 

appliance involuntarily.

- Remove the tool fastening key(s) before starting up 

the appliance. A key or tool that is not well fastened 

to the appliance may cause accidents on start-up.

- Do not overreach. Keep proper footing and balance 

at all times. This will allow you to maintain control of 

the appliance at all times.

- Dress properly. Do not wear baggy or loose-hanging 

clothes or accessories. Keep your hair, clothing and 

gloves away from moving parts. Loose clothes, 

jewellery or long hair can be caught in moving parts.

- Use clamps or a vise to secure the object to be 

worked in place. The work will be safer if both hands 

are free to control the tool.

- Do not touch any of the appliance’s moving parts 

while it is operating.

- Protect yourself from contact with and the inhalation 

of dust created by sanding wood and metal surfaces 

and surfaces coated with lead paint. Use protective 

equipment that complies with the appropriate health 

and safety regulations.

- When working in amianthus/asbestos and/or silica 

stone, the dust produced is extremely harmful to 

your health. Wear protection against inhalation of 

this dust, in compliance with current regulations on 

accident prevention.

- Exercise precaution after employing the stop 

operation on the appliance as the tool will continue 

moving from the effect of its own mechanical inertia.

- When working take care to avoid electric wires and 

gas or water pipes in order to avoid an electric shock.

Use and care:

- Do not use the appliance if its accessories are not 

properly fitted.

- Do not use the appliance if the accessories or 

consumables attached to it are defective. Replace 

them immediately.

- Do not use the appliance if the on/off switch does 

not work.

- Do not force the appliance’s work capacity. Use the 

correct power tool for each application. The correct 

power tool will do the job better and safer at the rate 

for which it was designed.

- Do not open the battery/ies under any circumstances 

whatsoever.

- When the battery/ies is not in use, keep it away 

from other metal objects like paper clips, coins, keys, 

screws ... that could connect a terminal to another.

- Do not short-circuit the battery terminals as this 

may cause an explosion or fire.

- The battery/ies should be stored at a temperature 

of below 40ºC.

- Avoid all contact with the liquid that could be 

released from the battery. In case of contact with 

eyes, wash them thoroughly and seek medical 

advice. The liquid spilled from the battery may cause 

irritation or burns.

- This appliance is not a toy. Children should be 

supervised to ensure that they do not play with the 

appliance.

- This appliance is intended for adult use. Ensure 

that this product is not used by the disabled, children 

or people unused to its handling.

- This appliance should be stored out of reach of 

children and/or the disabled.

- Keep the appliance in a dry, dust-free place, out of 

direct sunlight. 

- Keep the appliance in good condition. Check that 

the moving parts are not misaligned or jammed and 

make sure there are no broken parts or anomalies 

that may prevent the appliance from operating 

correctly.

- Keep the cutting tools sharp and clean.

- The appliance can be used on surfaces such as: 

wood, cardboard, plastic, plaster, etc.

- Do not use the appliance on any part of the body of 

a person or animal.

- Use the appliance and its accessories and tools 

in accordance with these instructions, taking into 

account the working conditions and the work to be 

performed. Use the appliance for operations different 

from those intended could result in a hazardous 

situation.

- Let the appliance running with no load for 30