If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
Installation
Auxiliary Operation (Fig 1)
- Operate the appliance only with the
auxiliary handle.
- Turn the auxiliary handle (F) in clockwise.
- Set the auxiliary handle on the appliance
into the required position.
- Tighten the auxiliary handle (F) in counter
clockwise direction.
Instructions for use
Before use:
- Make sure that all the product’s packaging has
been removed.
- Prepare the appliance according to the
function you wish to use:
Fitting the working tools: (Fig. 1, 2)
- Unplug the appliance from the mains.
- Only use tools with SDS-plus shaft.
- Clean and grease the shaft of the tool.
- Insert the tool by moving the sliding ring (B)
back. Now the SDS-plus chuck is open.
- Install the tool in. Turn it slightly until it can
be pushed in all the way and you can feel it
engages into place.
- Release the sliding ring (B). Now the tool is
locked.
SDS-plus adapter for drilling in wood or
metal (Fig. 3)
- Unplug the appliance from the mains.
- Fit the SDS-plus adapter (K) into the SDS-plus
6
- Unplug the appliance from the mains
when not in use and before undertaking
any cleaning task.
- This appliance is for household use only,
not professional, industrial use.
- This appliance is intended for adult use.
Ensure that this product is not used by the
disabled, children or people unused to its
handling.
- This appliance is not a toy. Children
should be supervised to ensure that they
do not play with the appliance.
- Do not expose the appliance to extreme
temperatures.
- Keep the appliance in a dry, dust-free
place, out of direct sunlight.
- Do not work on areas where there are
metal objects, such as nails and/or screws.
- Always check the workpiece before
operation and remove any obstructions
such as nails, staples, screws, string, rags,
cloths and other debris.
- Only use the appliance for carrying out
dry tasks.
- Make periodical checks on the sealing
ring,
- Do not use the appliance on any part of
the body of a person or animal.
- If the application tool should become
blocked, switch the machine off. Loosen
the application tool.
- Before switching on the power tool, make
sure that the application tool moves freely.
When switching on with a blocked drilling
tool, high torque reaction can occur.
- Always hold the body handle and side
handle of the power tool firmly. Otherwise
the counterforce produced may result in
inaccurate and even dangerous operation.
- Let the appliance running with no load
for 30 seconds in a safe position. If you
notice serious vibration or other defects stop
the appliance immediately. Then check the
problem and /or proceed as we describe on
Anomalies and Repair clause.
- The appliance can be used on surfaces
such as: wood, cardboard, plastic, plaster,
etc.
- Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance. Contact
with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes
property damage or may cause an electric
shock.
- Do not touch the bit during or immediately
after operation. The bit becomes very hot
during operation and could cause serious
burns.
- Do not use the power tool with a damaged
cord. Do not touch the damaged cord and pill
the plug
Warning:
Reduce the working time to avoid
risks related with too much vibration.
Product description and Specifications
Description
A
SDS Plus Chuck
B Bit Holder ring
C Rotary stop Lever
D Drilling/hammer drilling switch
E On/Off Switch
F
Auxiliary handle
G Grease cover
H Carbon Brush cap
I
Dust collector
J
Drill Chuck
K SDS-plus adaptor
Summary of Contents for VMP800M
Page 1: ...VMP800M ...
Page 68: ......
Page 69: ......
Page 70: ...CASALS POWER TOOLS S L Av Barcelona s n 25790 Oliana SPAIN EU www casalstools es ...
