Electric safety:
- Do not use the appliance if the
cable or plug is damaged.
- Ensure that the voltage indica-
ted on the nameplate matches
the mains voltage before plug-
ging in the appliance.
into the mains socket properly.
- Do not alter the plug. Do not
use plug adaptors.
- Do not leave the appliance
out in the rain or exposed to
moisture. If water gets into the
appliance, this will increase the
risk of electric shock.
- Check the condition of the elec-
trical connection cable. Dama-
ged or tangled cables increase
the risk of electric shock.
- If any of the appliance casings
breaks, immediately disconnect
the appliance from the mains
to prevent the possibility of an
electric shock.
- Do not use the appliance if it
are visible signs of damage or if
it has a leak.
- Do not touch the plug with wet
hands.
Use and care:
- Power required is 12V and 10
amps D.C
- Fully unroll the appliance’s
power cable before each use.
- Do not use the appliance if its
accessories are not properly
- Do not use the appliance if the
on/off switch does not work.
- Disconnect the appliance from
the mains when not in use and
before undertaking any cleaning
task.
- This appliance is for household
use only, not professional or
industrial use.
- Use this appliance, its acces-
sories and tools in accordance
with these instructions, bearing
in mind the working conditions
involved and the work to be com-
pleted. Using the appliance for
operations other than those for
which it is designed could give
rise to a dangerous situation.
- Do not run vehicle’s engine
while you use the appliance.
- This is appliance is designed
for occasional use only. Opera-
tion over an extended period of
time will overheat and damage
the appliance.
- When the appliance overheats
stop it immediately and let it cool
for approximately 30 minutes.
PRESSURE. The item being
serious injury.
will not have existing pressure
reading. You must be careful to
