41
004778320 - 16/07/2020
ENGLISH
9.1.2 Menu description
ICON
FUNCTION
DESCRIPTION
VALUES
Power
Setting the operating power
1..5
Ventilation
*(where
included)
Fan speed setting of the ambient air.
OFF*,1..5; Auto; Hi
Temperature
Displays the room temperature reading and allows you to set the desired
temperature.
6°C .. 51°C
Fuel
Function not used
Timer
It enables or disables the Timer. When it is enabled, the
fixed icon
will be
displayed
ON - OFF
ICON FUNCTION
SUBMENU
DESCRIPTION
VALUES
Set-up
[1]
Weekly timer
Assigning of programs (max 3) to the various days of the
week
[d1] ... [d7]
[2]
Programs
Programs setting menu
[P1] ... [P6]
[3]
Clock/date
Clock and date setting
[4]
Remaining hours
It displays the hours remaining until recommended
maintenance. The value "Hi" indicates a number greater than
999 hours.
[5]
System information It displays the current software version
[6]
Function not enabled
[7]
Eco Function
Enables or disables the Eco Mode which automatically
switches off and on depending on the room temperature
(only in configuration 1).
OFF; Eco
[8]
Re-ignition delta
Degree difference compared to the switch-off temperature,
below which the stove re-ignites (except in configuration 1).
0.5 ... 5.0°C
[9]
Anti-freeze
temperature
Minimum temperature below which the stove ignites (only in
configuration 1).
OFF; 3 ... 20°C
[10]
Keypad lock
It sets the key lock mode
OFF; Lo; Hi
[11]
Display brightness
It sets the degree of display brightness
OFF; 1 ... 5
[12]
Display mode
It sets the data display mode
OFF; 1 ... 4
[13]
Buzzer volume
It sets the acoustic warning volume
OFF; 1 ... 5
[14]
Combustion
You can set 3 different combustion configurations
1 ... 3
[15]
Function not enabled
[30]
Installer Menu
It modifies/displays the stove configuration
PWD: “54”
[31]
Manual auger load
(Where included) Manual activation of the pellet loading system
PWD: “54”
[40]
Service menu
Assistance centre menu
The submenus
[30]
and
[40]
of the Set-up menu are password protected and are for the exclusive use of the technical
assistance centre.
9.2 USING THE CONTROL PANEL
• Use the
arrow keys to move between the different menus that light up from time to time.
•
Hover over a specific function and press the
key to change the values with the keys.
• Pressing the key
again confirms the change.
•
In general, all flashing values can be changed using the
keys.
• The “cancel” key discards the change; if it is pressed and held down, any alarm code or error will be
displayed on the screen.
Summary of Contents for FILIPPO 8E
