46
12 AVAILABLE FUNCTIONS
12.1 TIMER
It is possible to set, enable and assign to the various days of the week the customised programs for the automatic
switching on and/or off of the stove.
Up to six customised programs can be configured.
For each program it is possible to set: start time, switch off time and desired temperature.
Up to three programs can be assigned to each day of the week.
The days of the week are identified by numbers: Monday = “d1”, Tuesday = “d2”; ...; Sunday = ”d7”.
12.1.1 Program settings
a) Use the arrow keys to go to the set-up menu and press the
key;
b) Select the password “7” with the
key and confirm with the
key;
c) Select the submenu
[2]
and confirm with the
key;
d) Scroll the programs
P1
...
P6
with the
and keys; select the one you want to modify with the key;
e)
The switch-on time will flash; change the value with the
and keys and press the key;
f)
The minutes value will flash; change the value with the
and keys and press the key;
g)
The value of the switch-off time will flash; change the value with the
and keys and press the key;
h)
The minutes value will flash; change the value with the
and keys and press the key;
i)
The desired temperature value will flash; change the value with the
and keys;
j) Press the
key to confirm the data entered.
12.1.2 Assigning program to days
With this function it is possible to assign up to three different programs to a specific day.
a) Use the arrow keys to go to the set-up menu and press the
key;
b) Select the password “7” with the
key and confirm with the
key;
c) Select the submenu
[1]
and confirm with the
key;
d) Use the
and keys to choose the day [d1] ... [d7] with which to associate the programs;
e) Select it with the key;
f)
The value of the first program to be assigned will flash:
P1...P6
or “
OFF
” to disable it;
g) Change the value with the
and keys and press the key;
h)
The value of the second program to be assigned will flash:
P1...P6
or “
OFF
” to disable it;
i) Change the value with the
keys and and press the key;
j)
The value of the third program to be assigned will flash:
P1...P6
or “
OFF
” to disable it;
k) Change the value with the
and keys and press the key
to confirm the set data.
12.1.3 Timer enabling/disabling
a) Use the arrow keys to go to the Timer menu .
b)
Confirm with the
key;
c) Scroll with the
and keys and select: “
ON
” to enable the timer or “
OFF
” to disable it.
d) Press the
key to confirm the selection.
When the timer is enabled, the fixed icon
will appear to indicate that the timer is active.
004778330 - 16/07/2020
Summary of Contents for LEONARDO 8ET
