cascade corporation 25L, User Manual

1

6814459-R6  EN

NTRODUCTION

I

PERATION

O

FP1955.eps

This user manual is for the Cascade L-Series Fork 

Positioner/Sideshifter.  Contents include an Operator's 

Guide, Installation Instructions and Periodic Maintenance.

NOTE:

 All specifications are shown in US and (Metric) 

units where applicable.  All fasteners have a torque value 

range of ±10% of stated value.

IMPORTANT:

 L-Series Fork Positioner/Sideshifter is metric.  

Supply fittings adapted as required for application.

Special Definitions

The statements shown appear throughout this manual 

where special emphasis is required.  Read all WARNINGS 

and CAUTIONS before proceeding with any work.  

Statements labeled IMPORTANT and NOTE are provided 

as additional information of special significance or to make 

the job easier.

WARNING –

 A statement preceded by 

WARNING is information that should be 

acted upon to prevent bodily injury.  A 

WARNING is always inside a ruled box.

CAUTION –

 A statement preceded by CAUTION is 

information that should be acted upon to prevent machine 

damage.

IMPORTANT –

 A statement preceded by IMPORTANT is 

information that possesses special significance.

NOTE –

 A statement proceeded by NOTE is information 

that is handy to know and may make the job easier.

WARNING

: Rated capacity of the truck/ 

attachment combination is a responsibility 

of the original truck manufacturer and may 

be less than shown on the attachment 

nameplate.  Consult the truck nameplate.

WARNING

: Do not operate this attachment 

unless you are a trained and authorized lift 

truck driver.

This section contains operating instructions for the 

Cascade L-Series Fork Positioner/Sideshifter.  It will help 

you avoid common errors which often cause damage to 

the equipment or product being handled.
This information is intended to simplify operator 

understanding about effective and safe Fork Positioner/

Sideshifter use and operation.  Read this information 

thoroughly before operating the attachment.  Be sure 

you know and understand all operating procedures and 

safety precautions.  If you have any questions, or don't 

understand a procedure, ask a supervisor.

Emphasize Safety!

  Most accidents are caused by 

operator carelessness or misjudgment.  You must 

watch for poorly maintained equipment and hazardous 

situations and correct them.

Backrest

Sideshifter

Fork 

Positioner

Forks