I
NSTALLATION
8
6077298-R7 EN
3
Install Shims and Capscrews
A
Shim as necessary with a maximum of 4
shims per side.
B
Install capscrews and tighten to 65 Nm.
NOTE:
Maximum 4 shims per side. Maximum
difference in number of shims per side is 2.
CAUTION:
Total allowable gap before tightening
capscrews is 0.5 mm maximum.
FP1125.eps
Capscrews –
Use lockwashers
and tighten to
65 Nm.
Shims –
Maximum 4 per side
to reduce allowable gap to
0.5 mm maximum.
FRONT
Sideshifter
Fork Positioner
A
B
NOTE:
Some configurations of this product are shipped
with the fork positioner unmounted. Follow this step to
install the mounting shims and capscrews.
FP1416.eps
Recommended Torque Sequence
B
C
D
FRONT
A
LH side top
B
RH side bottom
C
RH side top
D
LH side bottom
A
Fork Carriers
Confirm fork carriers are
behind face of carriage
using a straight edge.
RH Side
LH Side