Copyright 2019 © Cascade Sciences
MAXTRAP 50 & 105 Supplement Instruction Manual Rev 11.29.18
www.cascadesciences.com | info@cascadesciences.com | 503-847-9047
Receiving Your MAXTRAP
Inspect the Shipment!
This merchandise was carefully packed and thoroughly inspected before leaving our warehouse.
As soon as items are received from carrier please inspected for any damage caused by shipping
(both visible and concealed) as you only have
10 days
to fill a claim against carrier.
Please Inspected order check packing list against items upon for any missing parts.
Beginning from the date of delivery, you will have
10 days
to open and inspect all crates/boxes. Any
missing pieces must be reported during this time period, otherwise Cascade Sciences will not be held
responsible.
Take photos of any shipping damage. Refuse delivery or make note on the bill of lading.
1.
If anything is missing, please call us at 503-847-9047.
2.
Save the shipping carton until you are certain that the unit and its accessories function
properly.
3.
Carefully check all packaging for loose accessory items before discarding.
Parts List
•
Labconco Base Refrigeration Unit
•
COLDWELL Stainless Steel Reservoir (p/n 7100003)
•
Lid assembly (p/n 7100002)
•
6” sanitary gasket – viton (p/n 7100004)
•
6” sanitary clamp (p/n 7100005)
•
Fitted 3mm Neoprene insulator cap
•
4’ KF25 terminated vacuum hose
•
2 - kf25 clamps
•
2 - kf25 centering rings
•
Mobile TRAPSTAND (fits vacuum pump and MAXTRAP)
•
Thermal Transfer Fluid. 800ml. Make sure you have 800 ml of a heat transfer fluid such
as ethanol, glycol or a cryocool inside the reservoir.
Optional
Not Included but Necessary:
COLDWELL
