25
|
P a g e
INSTALLATION
Note:
Outgassed byproducts may be hazardous to or noxious for operating personnel. Vacuum
pump exhaust should be vented to a location outside the workspace in a safe manner in
accordance with all applicable laws, ordinances, and regulations.
V
ENT THE
P
UMP
E
XHAUST
The oven comes with a vacuum pump installed in a cabinet at the base of the oven. Failure
to vent the pump outside of the cabinet will result in outgassed byproducts coating oven
electrical systems and poses a potential hazard to oven operators.
Pump Cabinet and Electronics
The cabinet housing the vacuum pump also contains high-voltage electronics and should only be
accessed by a qualified electrical technician.
Exhaust Connection
½ Inch ID Hose (12 mm):
Pull the hose outside the port located on the lower left side of the cabinet.
Summary of Contents for CTVR522-H
