213372 Rev. 1
3
SD0070.ill
cascade
®
C-675514-1
SD0065.ill
NSTALLATION
3
Mount Attachment on
truck carriage
A
Center truck behind attachment.
B
Tilt forward and raise carriage into position.
C
Engage top mounting hooks with carriage.
Make sure center locator tab engages
center notch on top carriage bar.
D
Lift Attachment 2 in. (5 cm) off pallet.
I
BOLT-ON TYPE
(if fitted)
QUICK-CHANGE TYPE
Tighten Capscrews:
Class II / III –
120 ft.-lbs. (165 Nm)
4
Install and engage lower hooks
Inspect hooks for
excessive clearance.
(Reverse guides to reduce
clearance – see Step 2.)
B
Slide hook up
to engage
bar, install
pin in upper
hole (locked).
Upper
Bearings
SD0023.ill
GA0035.ill
ADJUST
SD0066.ill
Lower
Carriage
Bar
Lower
Carriage
Bar
SD0071.ill
A
3/16 in.
(5 mm)
max.
Tap into position, then
add clearance for
sideshifting:
3/32 in. (2.5 mm) min.
3/16 in. (5 mm) max.
ITA Class II –
0.32–0.36 in. (8–9 mm)
ITA Class III –
0.39–0.43 in. (10–11 mm)
ITA Class II –
0.60–0.66 in. (15–17 mm)
ITA Class III –
0.72–0.78 in. (18–20 mm)
Center
Notch
Truck
Carriage
C
C
C
