Cascade D Series, Operator'S Manual

- 10 -

安全操作和维护

S

AFE OPERATION AND MAINTENANCE

(OSHA REGULATIONS)

WARNING: The safe operation and maintenance of industrial trucks is regulated by Occupational Safety and Hleath(OSHA) 

regulations 1910. 178 and American National Standards Institude(ANSI) Safety Standard for Powered Industrial Trucks, 

ANSI B56.1-1969. When operating and maintenaning industrial trucks equipped with attachments you should pay particular 

attention to the following sections of these regulations. You should be familiar with all sections of these regulations. Ask your 

employer for the complete regulations.

(a) General Requirement

(4) Modifications and additions which affect capacity and safe operation shall not be performed by the customer or user without 

manufacturers prior written approval. Capacity, operation and maitenance insturction plates, tags or decals shall be changed 

accordingly.

(5) If the truck is equipped with front-end attachments other than factory installed attachments, the user shall request that the truck 

be marked to identify the attachments, the user shall request that the appropriate weight of the truck and attachment combination at 

maximum elevation with load laterally centered.

(6) The user shall see that alll namaplates and markings are in place and maintained in a legible condition.

(e) Safety Guards

(2) If the type of load presents a hazard, the user shall equip fork trucks with a vertical load backrest extension in accordance with (a)

(2) following. 

(a)(2) All new powered industrial trucks acquired and used by an employer after February 15, 1972 shall meet the design and 

construction requirements for powered industrial trucks established in the "American National Standard for Powered Industrial Trucks, 

Part II, ANSI B56.1-1969", except for vehicles intended primarily for earth moving or over-the-road hauling.

(I) Operating Training

Only trained and authorized operators shall be permitted to operate a powered industrial truck. Methods shall be devised to train 

operators in the safe operation of powered industrial trucks.

(m) Truck Operations

(1) Trucks shall not be driven up to anyone standing in front of  a bench or other fixed object.

(2) No person shall be allowed to stand or pass under the elevated portion of any truck, whether loaded or empty.