Cascade ETA-22, Instruction Manual

3

1.  Remove the plastic protective cover from the sole plate of the iron and clean with a 

soft, damp cloth.

2.  Select the ironing temperature for the desired (as instructed by the manufacturers 

instructions) item being pressed and align the corresponding fabric type marked on 

the temperature control knob, with the arrow marked on the housing (just in front of 

the knob).

3.  If using steam, place the iron onto the sole plate and fill the water reservoir through 

the filling aperture using the measuring beaker provided.  Do not overfill or exceed 

the MAX water level marked on the water reservoir.

4.  Stand the iron in the upright position (resting on its heel).

5.  Fully unwind the cable, plug in and switch on. The temperature indicator lamp will 

illuminate to show that the iron is heating up.

6.  When the indicator lamp goes out, the iron has reached the selected temperature.

7.  If using steam, turn the steam control knob to the setting in the table below.
8.  The iron can be turned off any time by switching off at the mains and unplugging.

CAUTION

-

Some parts of the iron may have residual oil from the manufacturing process and 

may smoke slightly on first use.  Always test the iron before use on an old piece of 

fabric to ensure that the sole plate is clean.

-

Stubborn creases may be removed by using an additional burst of steam or by 

using the water spray feature (press their respective buttons).

-

This iron is suitable for use with tap water.  If the water in your area is particularly 

hard then it is advisable to use distilled or demineralized water.

-

The steam function can only be used at the higher ironing temperatures. 

Using your Steam Iron

-

Stand the iron in the upright position (resting on its heel), switch off, unplug and 

allow to cool slightly.

-

Place the iron onto the sole plate and using the measuring beaker provided, fill the 

reservoir through the filling aperture.  Do not overfill or exceed the MAX water level 

marked on the water reservoir.

-

Stand the iron in the upright position, plug in, switch on and allow the iron to come 
back up to temperature before selecting the steam setting.

Refilling the Steam Iron