CASE CONSTRUCTION CX37C Operator'S Manual Download

Page: 137 / 228

6 - MAINTENANCE

6 - MAINTENANCE

###_7_###

General information

Basic instructions

WARNING

Improper operation or service of this machine can result in an accident.
If you do not understand a maintenance procedure, or doubt your ability to perform a maintenance
procedure correctly, see your authorized dealer.
Failure to comply could result in death or serious injury.

W0157A

WARNING

Improper operation or service of this machine can result in an accident.
Raised equipment or machine movement without an operator can cause serious injury. Always do the
following before performing any maintenance:
Park the machine on flat, level ground.
Lower the attachment to the ground.
Shut down the engine and remove the ignition key.
Lock the tracks.
Failure to comply could result in death or serious injury.

W0944D

WARNING

Falling object hazard!
Risk of injury from FALLING ENGINE HOOD. Latch the hood in the fully open position prior to working
within the engine compartment.
Failure to comply could result in death or serious injury.

W1090B

NOTICE:

be sure all the service operations in this section are carried out punctually at the intervals given, in order to

ensure optimum performance levels and maximum safety when using the machine.

NOTICE:

while any company can perform necessary maintenance or repairs on your equipment, CASE CONSTRUC-

TION strongly recommends that you use only authorized CASE CONSTRUCTION dealers and products that meet
given specifications. Improperly or incorrectly performed maintenance and repair voids the equipment warranty and
may affect service intervals.

• Respect the maintenance intervals by checking the hour meter every day. Before starting maintenance, park the

machine on flat, firm ground, away from any obstacles, with the arm retracted and the bucket on the ground. Lower
the dozer blade (if equipped) until it rests on the ground. Unless otherwise specified, all maintenance operations
must be carried out with the engine stopped and the key removed from the starter switch. Wait for all circuits to
cool down before starting work.

• Clean the grease fittings before lubrication. Clean around plugs and filler holes before adding fluid. No dust or

dirt must enter the components or the circuits. Wear suitable clothing and remember to use the necessary safety
equipment.

• When carrying out service work on the machine, place a "Do not operate" tag on the instrument panel. Never climb

down from the operator's compartment leaving the engine running.

• Remove the necessary lower panels during maintenance of certain machine components. Make sure the lower

panels are properly closed before operating the machine.

Any modification to the machine without prior authorization could cause serious injury. Do not make any modifications
without authorization. Consult your CASE CONSTRUCTION Dealer.

NOTICE:

if you use your machine in particularly harsh conditions (dusty or corrosive atmosphere, etc.), the servicing

intervals should be reduced accordingly.

NOTICE:

take particular care to replace all filters regularly. Clean filters mean longer engine running life.

6-1