Engine - Engine and crankcase
42. Remove the six socket head bolts
(1)
and three back-
ing plates
(2)
securing the drive shaft assembly to the
engine drive pulley. Disengage the drive from the pul-
ley.
RCPH10CCH562AAB
32
43. Remove the nuts and washers
(1)
from the cooling
assembly support bracket on the left and right sides.
RCPH10CCH572AAB
33
44. Properly support the bracket, and remove the four
bolts
(1)
securing the bracket to the hood support. Re-
move the assembly and set aside.
RCPH10CCH037BAB
34
45. Loosen the clamp
(1)
and disconnect the coolant fill
line.
46. Loosen the nuts
(2)
and
(3)
and disconnect the cab
heater supply and return lines.
47. Disengage the clamp
(4)
and remove the air bleed
hose.
48. Remove the three bolts
(5)
securing the front support
bracket.
RCPH10CCH038BAB
35
47533562 02/10/2013
10.1 [10.001] / 11
