Engine - Engine and crankcase
Engine - Install
Magnum 235, Magnum 260, Magnum 290, Magnum 315, Magnum 340, Magnum 370 [ZCRD02588 - ]
Prior operation:
Engine - Remove (10.001)
NOTE:
During the assembly of components with O-ring seals, new seals should be lubricated and installed.
1. Install the rear engine mounts.
RCPH07CCH166AAB
1
2. If front engine mount brackets
(4)
were removed, re-
install and secure with the four(4) bolts
(1)
previously
removed.
3. Torque the bolts to
110 - 113
N·m
(
81 - 83
lb ft
).
4. Position the mount
(3)
, install the bolt and torque the
nut
(2)
to
160 - 220
N·m
(
118 - 162
lb ft
).
RCPH10CCH833AAB
2
5.
WARNING
Heavy objects!
Lift and handle all heavy components us-
ing lifting equipment with adequate capac-
ity. Always support units or parts with suit-
able slings or hooks. Make sure the work
area is clear of all bystanders.
Failure to comply could result in death or
serious injury.
W0398A
Support the engine with proper lifting equipment and
lower the engine into position in the front frame.
RCPH10CCH832AAB
3
47533562 02/10/2013
10.1 [10.001] / 18
