Engine - Engine and crankcase
25. Install the opposite end
(1)
of the pipe into the air
cleaner outlet hose. Do not tighten the hose clamp
(2)
at this time. Secure the pipe support with the bolt
(3)
removed earlier.
RCPH10CCH804AAB
16
26. Using the bolts
(1)
remove earlier, secure the intake
pipe support to the bracket.
NOTICE:
Tighten all hose clamps at this time. It is impor-
tant to have all hose clamps properly tighten to prevent dirt
from entering the intake system.
RCPH10CCH808AAB
17
27. Move the engine blow-by tube
(1)
into position. At the
air intake pipe, install the hose connection and engage
the clamp
(2)
.
RCPH10CCH805AAB
18
28. Connect the blow-by tube to the engine and engage
the clamp
(1)
.
RCPH10CCH807AAB
19
47533562 02/10/2013
10.1 [10.001] / 22
